| Angle
|
<angle value> between 0° and 90°
- Sets internal
damper angle.
- 0° angle value sets damper to fully
closed position.
- 90° angle value sets damper to fully
opened position.
For Back Draft Dampers, it is either 0 or 90.
|
| Attribute Type
|
1-Gravity
- Sets attribute to
gravity (where pressure or velocity opens and closes the damper).
2-CounterBalanced
- Sets attribute to
counterbalance(where adjustable counterbalance weights precisely reduce the
pressure that is required to open the damper).
|
|
Auto Size Options
|
s
autoblade
- Sets blade size
by solving: Blade Depth=Body Depth/No.Of Blades
box
<numeric value>/<numeric
value>
- Sizes device by
solving equations: Body Width=W1+<first numeric value> and Body
Depth=D1+<second numeric value>
endsequal
- Confines the
device to have equal size connections at each end.
Separate combined entries with semi colon.
|
| Blade Depth
|
Positive <numeric value>
- Sets thickness of
damper blade.
The value doesn't exceed half the Body | Diameter.
|
| Blade Diameter
|
Positive <numeric value>
- Sets damper blade
diameter. Limited by Body Diameter and Clearance properties.
|
| Blade Orientation
|
1-according
- Sets all blade
angles clockwise.
2-opposing
- Sets blade angles
clockwise and counter clockwise alternatively.
|
| Blade Thickness
|
Positive <numeric value>
- Sets thickness of
sheet metal blade of damper.
|
| Blade Width
|
Positive <numeric value>
- Sets damper blade
width. Limited by Body Width property.
|
| Body | Depth
|
Positive <numeric value>
- Sets box depth
independent of End1 and End2. Limited by Auto Size property.
|
| Body | Diameter
|
Positive <numeric value>
- Sets body
diameter. Limited by Auto Size property or End1 diameter.
|
| Body | Length
|
Positive <numeric value>
|
| Body | Width
|
Positive <numeric value>
- Sets box width
independent of End1 and End2. Limited by Auto Size property.
|
| Cell Library
|
<cell library file name>
- Library file name
for device cells.
|
| Cell Symbol Name
|
<cell name>
- Sets the model
cell to the device.
Prerequisite of proper Cell Library for AHUs.
|
| Clearance
|
Positive <numeric
value>
- Sets damper
clearance. The value adds up to Body | Diameter.
- The
AutoSize field displays the current CL value.
|
| Connection 1 | Length (L1)
|
Positive <numeric value>
- Sets straight
length at End1.
- Sets connection
length at End1.
|
| Connection 2 | Length (L2)
|
Positive <numeric value>
- Sets straight
length at End2.
- Sets connection
length at End2.
|
| Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1
with size 2, and a female connection at End2 with an overall reduction of
component's dimensions of .13
|
| Connection | Side Distance
|
Positive <numeric value>
- Sets side inset
if Body Width is larger than W1 (End1). Limited by Auto Size property.
|
| Connection | Top Distance
|
Positive <numeric value>
- Sets top inset if
Body Depth is larger than D1 (End1). Limited by Auto Size property.
|
| Control | Depth
|
Positive <numeric value>
- Sets the depth of
the control box mounted on the unit.
|
| Control | Distance from Connection 1
|
Positive <numeric value>
- Sets the distance
between the front surface of the control box to the inside edge of the
connection at End1.
|
| Control | Drive Type
|
ControlDrive options: 1.
NoControl, 2. Handle, 3. MotorControl set type to fitting.
1-NoControl
- Does not generate
a control box.
2-Handle
- Generates handle
control box.
3-MotorControl
- Generates
motorized control box.
|
| Control | Length
|
Positive <numeric value>
- Sets the length
of the control box mounted on the unit.
|
| Control | Side Distance
|
Positive <numeric value>
- Sets the offset
distance between the bottom of the control box and the bottom of the device on
which it is mounted.
|
| Control | Top Offset
|
Positive <numeric value>
- Sets the offset
distance between the drive axis of the control box and the top of the device on
which it is mounted.
- Sets offset to
damper blade from connection points.
|
| Control | Width
|
Positive <numeric value>
- Sets the width of
the control box mounted on the unit.
|
| Curtain Height
|
Positive <numeric
value>
- Sets the height
of the extended exterior by damper side.
|
| Curtain Length
|
Positive <numeric
value>
- Sets the length
of the curtain; within length of damper .
|
| Damper | Side Space
|
Positive <numeric value>
- Sets distance
between inside of body and first damper.
|
| Damper | Space
|
Positive <numeric value>
- Sets spacing
between dampers.
|
| Damper | Type
|
-
BackDraft
-
VolumeControl
-
MotorizedVolumeControl
- Sets damper type
to function the damper accordingly.
|
| Damper | Depth
Damper | Length
Damper | Width
|
Positive <numeric
value>
- Sets damper
dimensions —the width, depth and length respectively.
Note: The
default End Spec values of rectangular curtain fire damper match to the damper
width and depth.
|
| Damper | Width
|
Positive <numeric value>
|
| Distance Axis
|
Positive <numeric value>
- Automatically set
by the application.
|
| Handle Length
|
Positive <numeric value>
- Sets length of
the rod of damper handle.
|
| Inside Damper Width
|
Positive <numeric value>
|
| No. Of Blades
|
<integer>
- Sets number of
damper blades. Limited by Auto Size property.
|
| No. Of Dampers
|
<integer>
- Sets number of
dampers. Limited by
Auto Size property.
|
